Installationsprotokoll reev Balancer

Step 1 - Initial Setup
Please enter the personal information below.
First Name:*
Last Name:*
Your Email Address:*
How can we contact you?
Name of the location where you require the EMS:
Address of the location where you require the EMS:
Adresse* Adresszusatz City ZIP / Postal Code
Country*

Step 2 – Backend Connection
Please enter the information about backend below.
How are your charge points currently connected to the backend?*
Via LTE*
Via LAN*
For the EMS commissioning process, we'll need one-time access to your charge points to conduct firmware updates. Please contact support@reev.com to schedule a virtual appointment.
Referring to the sticker similar to the image on your router, please provide the necessary details:
Serial number of the router*
MAC address of the router*
Password of the router*

Step 3 - Select your Load Management
Do you want Static or Dynamic Load Management?*
Please select one of the electricity meters currently used in your charging infrastructure.
Please Enter the current transformer ratio at the location
If you did not select a connection via Teltonika in the previous step, please also enter the the following data.

Referring to the sticker similar to the image on your router, please provide the necessary details:
Serial number of the router*
MAC address of the router*
Password of the router*
Access the link provided to download the Excel file and input the distribution and phase rotation details for your electrical infrastructure. Once you've filled out the Excel sheet, kindly upload it again below.
Upload a file:*
Accepted file types: xlsx, xls, pdf, Max. file size: 128 MB.

Step 4 - Confirmation
*
- The installation has been conducted in compliance with TAB and VDE standards. I confirm the following aspects of a proper installation: Successful commissioning of the charging point(s) as per DGUV Regulation 3 at the final installation site in accordance with DIN EN 61851-1, including functional testing according to DIN EN 61851-1, VDE 0122-1:2012-01, and DIN VDE 0100 Part 600
*
- Please be informed that final configuration of the system can only proceed once the installation protocols has been received by reev GmbH.
Name
This field is for validation purposes and should be left unchanged.

Installation protocol reev Balancer